Free · DOST-SEI Exam Part II · Science

Chemistry Reviewer for the DOST Exam

Chemistry is one of the five sciences in Part II of the DOST-SEI Undergraduate Scholarship Exam. This free DOST chemistry reviewer covers atomic structure, stoichiometry, gases, acids and bases, and electrochemistry, with a practice test that shows where you stand.

Practice test

Chemistry Practice Test

This Chemistry Practice Test is made up of multiple-choice questions on high school chemistry, including some advanced topics such as thermodynamics and kinetics, modeled on the science items of the DOST-SEI exam. Questions are drawn from all fifteen topic areas listed below, so each set mixes concept questions with calculations such as mole conversions, gas law problems, and pH.

Choose 20, 30 or 50 questions, then click START QUIZ. The quiz is untimed, and after each answer you’ll see right away whether you got it right, with an explanation. Keep a pen and scratch paper nearby for the problem-solving items.

Start the quiz below and see how ready you are for the chemistry part of the exam.

Loading DOST practice quizzes…

TOPNOTCHER.PH has a FREE DOST Exam Reviewer app.

SciScholar Exam Reviewer is our free DOST exam reviewer app for the UGS and JLSS, with a daily 10-question challenge, study cards, missed-question review and a timed 100-item mock exam.

Get it on Google Play

Google Play and the Google Play logo are trademarks of Google LLC.

What’s covered

Coverage of the Chemistry Test

The questions in this chemistry reviewer come from fifteen topic areas. Use this list as your review checklist:

  1. Matter and Separation Techniques

    Elements, compounds, and mixtures, physical and chemical changes, and separation by filtration, distillation, chromatography, and crystallization.

  2. Measurement and Experimental Reasoning

    Density, significant figures, accuracy and precision, calibration, experimental controls, and interpreting data.

  3. Atomic Structure and Periodic Trends

    Subatomic particles, isotopes, electron configurations, atomic and ionic radii, electronegativity, and ionization energy.

  4. Chemical Bonding and Structure

    Ionic, covalent, and metallic bonding, Lewis structures, molecular geometry, polarity, intermolecular forces, and naming compounds.

  5. Chemical Reactions

    Balancing equations, types of reactions, the law of conservation of mass, and net ionic equations.

  6. Moles and Stoichiometry

    Molar mass, counting particles, empirical and molecular formulas, limiting reactants, and percentage yield.

  7. Gases

    The gas laws, ideal gas calculations, partial pressures, kinetic molecular theory, effusion, and how real gases behave.

  8. Solutions and Solubility

    Concentration, dilution, mixing solutions, solubility, precipitation, and colligative properties.

  9. Acids, Bases, and Titration

    pH and pOH, strong and weak acids, conjugate acid-base pairs, buffers, indicators, and neutralization.

  10. Thermochemistry and Thermodynamics

    Calorimetry, enthalpy, Hess’s law, internal energy, entropy, Gibbs free energy, and whether a reaction is spontaneous.

  11. Chemical Kinetics

    Reaction rates, collision theory, activation energy, catalysts, rate laws, and reaction order.

  12. Chemical Equilibrium

    Dynamic equilibrium, Le Châtelier’s principle, equilibrium constants, and reaction quotients.

  13. Redox and Electrochemistry

    Oxidation numbers, balancing redox reactions, galvanic cells, electrode potentials, electrolysis, and electroplating.

  14. Organic and Applied Chemistry

    Hydrocarbons, functional groups, isomers, organic reactions, polymers, detergents, and reducing chemical waste.

  15. Nuclear Chemistry

    Radioactive decay, nuclear equations, half-life, activity, and radiocarbon dating.

Quick review

High-Yield Chemistry Formulas and Rules

These formulas and rules show up again and again in chemistry problems. Know what each one means and when to use it:

  • Density

    Density = mass ÷ volume, usually in g/mL or g/cm3.

  • The mole

    1 mole = 6.022 × 1023 particles. Moles = mass ÷ molar mass.

  • Ideal gas law

    PV = nRT. At 0 °C and 1 atm, 1 mole of an ideal gas takes up about 22.4 L.

  • Combined gas law

    P1V1/T1 = P2V2/T2, with temperature always in kelvin (K = °C + 273).

  • Dilution

    M1V1 = M2V2. Adding solvent lowers concentration but not the moles of solute.

  • pH scale

    pH = −log[H+], and pH + pOH = 14 at 25 °C. Each pH unit is a tenfold change in acidity.

  • Periodic trends

    Across a period, atomic radius decreases while electronegativity and ionization energy generally increase. Down a group, the reverse.

  • Percent yield

    Percent yield = (actual yield ÷ theoretical yield) × 100%.

  • Half-life

    After n half-lives, amount left = starting amount × (½)n. 80 g becomes 10 g after 3 half-lives.

  • Gibbs free energy

    ΔG = ΔH − TΔS. A reaction is spontaneous when ΔG is negative.

  • Oxidation and reduction

    Oxidation is loss of electrons, reduction is gain. Remember “OIL RIG.”

  • Le Châtelier’s principle

    When a system at equilibrium is disturbed, it shifts in the direction that reduces the change.

Answering tips

Tips for Answering Chemistry Questions

  1. 1. Write down what’s given.

    List every value with its unit, then write what you need to find. This turns a wordy problem into a clear setup.

  2. 2. Let the units guide you.

    Use dimensional analysis: arrange conversion factors so unwanted units cancel and only the answer’s unit is left.

  3. 3. Balance before you calculate.

    Stoichiometry only works with a balanced equation. Check the coefficients before using any mole ratio.

  4. 4. Use the periodic table.

    An element’s position tells you its valence electrons, likely charge, and trends in size and electronegativity.

  5. 5. Use kelvin for gas problems.

    Gas laws only work with absolute temperature. Add 273 to every Celsius value before you substitute it.

  6. 6. Estimate first.

    A rough estimate helps you spot answer choices that are far off, like a mass larger than what you started with.

Study guide

Worked Example: Converting Grams to Moles

Problem: How many moles of water are in 36 g of H2O? Use H = 1.0 and O = 16.0.

Solution:

  1. Find the molar mass of water: 2(1.0) + 16.0 = 18.0 g/mol.
  2. Divide the mass by the molar mass: 36 g ÷ 18.0 g/mol = 2.0 mol.
  3. For the number of molecules, multiply by Avogadro’s number: 2.0 × 6.02 × 1023 = 1.20 × 1024 molecules.
  4. Check the units: grams cancel, leaving moles.
  5. Answer: 2.0 moles of water.

Common Chemistry Mistakes Made by Examinees

These errors cost examinees the most points in chemistry:

  • Using Celsius instead of kelvin in gas law calculations.
  • Calculating with an equation that isn’t balanced.
  • Confusing accuracy (closeness to the true value) with precision (closeness of repeated results).
  • Mixing up the atomic number and the mass number of an element.
  • Forgetting that a lower pH means a more acidic solution.
  • Mixing up oxidation and reduction, or the anode and the cathode.

Writing down units at every step and checking your setup before calculating will prevent most of these.

How to Review Chemistry Effectively

Chemistry builds on itself, so a steady review plan works better than cramming.

To make your review count:

  • Study one topic area per session, using the coverage list above as your guide.
  • Memorize the first 20 elements and the common polyatomic ions.
  • Practice mole, stoichiometry, and gas law problems every day.
  • Make your own formula sheet and review it before each session.
  • Keep a log of the problems you got wrong and redo them a few days later.
  • Take this practice test again with more questions as your score improves.

Solving problems is the fastest way to learn chemistry, so spend more time practicing than rereading notes.

Test-Taking Strategies for Chemistry Items

On exam day, use this routine for each chemistry question:

  1. Identify the topic and the formula or concept the question needs.
  2. List the given values with their units.
  3. Convert units where needed, such as °C to K, mL to L, or grams to moles.
  4. Solve step by step and check that your answer makes sense.
  5. Eliminate choices with the wrong unit or an impossible value.

Part II gives you 65 minutes for all five sciences, so skip long calculations at first and come back to them once the quicker items are done.

Building Confidence in Chemistry

Chemistry has a reputation for being difficult, but most problems follow a small set of patterns. Once you recognize a mole conversion, a gas law problem, or a dilution, you can solve it the same way every time.

With regular practice and careful attention to units, chemistry can become one of your most reliable sources of points and help you earn a DOST scholarship.

Final Reminder

Chemistry questions reward careful setup. Write down what’s given, keep track of units, balance your equations, and check that every answer makes sense before you choose it.

More Science practice tests

TOPNOTCHER PH is an independent reviewer website, not affiliated with the Department of Science and Technology or DOST-SEI. Practice questions are for review only and are not actual exam questions.